View Single Post
  #1 (permalink)  
Old 03-07-2008, 03:01 AM
kcisjojo kcisjojo is offline
iPhone? More like MyPhone
 
Join Date: Jan 2008
Device + Firmware: 16 gb IPhone 1.1.4
Operating System: Vista
Location: So Cal
Posts: 282
Thanks: 13
Thanked 81 Times in 61 Posts
How To Fix Broken Ringer/Silent Switch

Alright so Ive been seeing alot of people asking for an app to fix a broken ringer/silent switch, well to be honest with you all, its not going to happen. The switch is a hardware switch.

So first off, you need to be willing to open your iphone up. Its not very difficult to do.
Things youll need:
#00 screwdriver philips (can get for under $5)
a new iPhone OEM Headphone Audio Jack Cable (can be found on ebay for less than $20 including shipping)
ipod opening tools (around $25 - $30) or flat blade screwdriver and razor blade

here is a walkthrough on how to remove the back and it shows where all the screws are located.

http://www.ifixit.com/Guide/iPhone/H...ne-Jack/105/3/

this is a guide, you can use their tools or a razor blade and a small flat blade screwdriver works well if you dont want to spend $25 - $30 to buy the tools.

Follow along the guide above and just do one step at a time.

I find it is best to label or mark somehow on where each screw came from so when it comes to putting it back together you know where they all go and none get mixed up.

Take Out Sim Card Tray
So basically just pop antenna cover off
remove 3 screws holding back down and pop that off
remove screws holding the headphone, switches, etc down
gently peel up the flex cable that attaches power switch to rest of unit,
youll have to pull the little metal piece off your original ringer switch and place it on the new one, there is a small piece of plastic on the new one just pull it off and there is tape underneath to hold the new one down.
screw everything down, leaving power switch for last, then remove piece of plastic that is on the flex cable and tape it back down to where it was.
Screw down the power button
snap the back on again and replace the 3 screws
replace antenna cover

You can now use your ringer/silent switch once again.

To do this it took me like an hour, most of my time was spent trying to figure out how to get the antenna cover off. Its not screwed down at all so it just takes so work, its down pretty good so dont get discouraged if it takes a bit. Once I had that off though it was a piece of cake.
__________________
16 GB 1.1.4 Ziphone Unlocked, Activated, Jailbroken
If I helped you make sure to hit the thanks button

[How To] Customize on 1.1.3 and 1.1.4......Windows Guide...............OS X Guide

How To Fix A Broken Ringer/Silent Switch

Last edited by kcisjojo; 04-08-2008 at 08:13 AM.
Digg StumbleUpon Delicious Reddit Newsvine Google Yahoo Thanks Reply With Quote
The Following User Says Thank You to kcisjojo For This Useful Post:
shawnhale05 (08-20-2008)