
03-07-2008, 12:25 PM
|
|
iPhone? More like MyPhone
|
|
Join Date: Jan 2008
Device + Firmware: 16 gb IPhone 1.1.4
Operating System: Vista
Location: So Cal
Posts: 282
Thanks: 13
Thanked 81 Times in 61 Posts
|
|
|
|
I used the tools from ifixit, but trying to remove the antenna cover broke one of them. To get the metal back off, first remove the screws and then i used a small flat screwdriver and pried the back up just enough so i could slide something in the outside edges, i did that back and forth no each edge and had that part open in less than 5 minutes. Patience is key. If you try to force it chances are you will bend your rear cover.
If you bend your rear cover beyond saving, you can order a new one, Just go to ebay and look for an OEM Rear Iphone cover or something like that and you can order a new one for pretty cheap.
|
Last edited by kcisjojo; 03-07-2008 at 12:26 PM.
Reason: typo
|