08-15-2008, 11:19 AM
|
|
What's Jailbreak?
|
|
Join Date: Aug 2008
Device + Firmware: iPhone 3g 2.0
Operating System: Win XP Pro SP 2
Posts: 19
Thanks: 3
Thanked 5 Times in 4 Posts
|
|
|
|
I have the xylo t3 and have to say that I was deeply disappointed:
The frontplate is constructed in such a way that the face panel is suspended a few mm away from the screen. I'm not sure why it was done that way, but it causes some unpleasant effects. When you touch the screen you first hit the faceplate and you then have to push it against the screen. (it is advertised as 'rigid' but its pretty flexible) This occasionally causes mis-presses because sometimes you aren't actually pushing all the way, especially when you are sliding your finger. You let up a little on the pressure and it still feels like you are touching the screen but the connection is actually gone. More serious is the fact that this symptom increases drastically towards the edges of the screen where the 'suspension' is stronger. You have to press -very- hard to use the corners or edges of the screen. This is really my main complaint about the case and is what caused me to shelve it. Also, you can wind up with weird pockets of moisture under the face plate in the center where it is flexible enough to sit very close to the screen. I have no idea where these come from and I spent something stupid like an hour trying to 'dry' both the screen and the inside of the face to no avail. Not a big deal and you can 'clear' them out by gently twisting the case and causing the suspension of the faceplate to reassert itself.
I realize these were minor complaints and I was a little naive to not expect some degradation in touch-quality, but it really wasn't worth the 40$ I paid... at all.
|
|
Linear Mode
