Pwning 2.0 On Windows [Guide/Troubleshooting]

[neoanantha]

Originally Posted by Rakeshpatel

thanks, but i have a question. I have a 1st gen iphone jailbroken, activated, unlocked on 1.1.4 using ziphone. Do i follow all the steps highlighted or can i skip the unlock steps and just restore to firmware 2.0. as the iphone is already jailbroken, activated, unlocked . thanks

U gotta leave the bootneuter on...to get this custom restore to work...and u get bootneuter automatically if u have pawned ur iphone using Winpwn...so just pwn it using Winpwn to 1.1.4 and follow the steps...u should be fine

u also get bootneuter from installer...but i am not sure how it works if u used ziphone earlier and try to use bootneuter now....coz

the process of jailbreaking/unlocking by ziphone is totally different from winpwn

[frankydabull]

I got it right the first time, well kinda.

winpwnd my phone [you have to at least select the 1.1.4 firmware file to get to the pwn screen]
Tried loading up the custom firmware in the recovery mode that my phone went to after pwning, got an error5
Put phone in DFU
Tried loading up the custom firmware in that mode got an error 1
Realized i was a dumba$$ for using an old version of itunes
upgraded ITunes
Restarted
Loaded custom firmware through itunes
Good to go

Only problem is, I had extended prefs on my phone, and I think thats why my phone is going in a constantly restarting every 30 seconds

[questioncom]

worked great for me. its currently flashing the baseband. should be done in a few min. thanks for this.

[dallasnights]

WORKS GREAT Thanks so much!

[vomer]

Originally Posted by shikage

Sweet! After several tries and a near heartattack when my phone got stuck in DFU at one point I finally got this to work.

I had a 1st Gen iPhone running 1.1.4 firmware. I used Winpwn to pwn the phone and install 1.1.4 with Bootneuter, updated to 4.9BL and unlocking the Baseband.

WinPwn updates the 3.6 bootloader to 4.6? Can someone please clarify?

[neoanantha]

Originally Posted by vomer

WinPwn updates the 3.6 bootloader to 4.6? Can someone please clarify?

Yes it does...while pwning to 1.1.4 using WinPwn

[vomer]

Originally Posted by neoanantha

Yes it does...while pwning to 1.1.4 using WinPwn

Is there any benefit or loss in updating the baseband from 3.9 to 4.6?

[stevenisHAUNTED]

My phone is now upgraded & fully functional! Thanks alot!!

[cosmoLV]

For Those Who have problems with restoring

i make another upload: iPhone1,1_2.0_5A347_Custom_Restore__BL_4.6.ipsw

Upload Mirror: iPhone1,1_2.0_5A347_Custom_Restore__BL_4.6.ipsw

Upload Mirror 2: (FTP, Better speed) iPhone1,1_2.0_5A347_Custom_Restore__BL_4.6.ipsw

Universal Package, Dont require to be first PWNED - Just restore in itunes, but put iPhone in DFU Mode:

IMPORTANT!
================================================== ==========

A... You need to bee on 1.1.4 firmware!

1. Put iPhone in DFU Mode! Tutorial:
iClarified - iPhone - How to Put an iPhone Into DFU Mode

2. Shift Restore in iTunes - Windows | Option restore in MAC
3. Wait until Restore Process Finishes
4. Thats all, just wait after Bootneuter finishes... Important!

5. Thats all - Activated/Unlocked/Jailbreaked

Allready installed OpenSSH -
on first try to SSH the iPhone not work, give some 2 or 3 tryes to connect...

This firmware works for Booth Bootloaders 4.6 and 3.9
================================================== ==========

if i help you, give me Thanks


UPDATE
EXPLANATION and some Fixes

1. Why DFU mode?
In DFU mode iTunes Wipes Phone clear and then restores it, this avoids previus PWNAGES and unlocks...

2. If you get Error 1600 from iTunes (or if you see in your log a failure to prepare x12220000_4_Recovery.ipsw), try: mkdir ~/Library/iTunes/”Device Support” ; if that
directory already exists, remove any files in it.

3. If DFU restores are giving you trouble, another route to pwned 2.0 for 1G owners is to use our first pwnage at 1.1.4. Once you are pwned there, you can do a normal recovery-mode restore to your custom 2.0 ipsw. BTW the iPhone does *not* need to be pre-pwned to be able to DFU-restore into a pwned ipsw — it needs to be pre-pwned only for normal recovery-mode restores of custom ipsw’s."

Thanks Dev-Team and all the peoples who working on this! Big Thanks!

[bhz1]

So if I real all this correctly, if I am currently running 1.1.4 and had already Pwned my phone all I need to do is use iTunes to restore this custom firmware? In other words, I have a 1.1.4 jailbroken with Winpwn it is already on the 3.9 bootloader as that was what was originally on the iPhone and I never upgraded it. This sounds too easy.

[hellraiza]

If the last .ipsw is that easy, cosmoLV, u are amazing! Im d/l now, just one question, if i am running 1.1.4 that was jailbroken using iLiberty is it safe to follow the instruction u just posted?

[questioncom]

only issue i have is my wallpaper doesnt change. i ssh into the phone and deleted the lockdown jpeg, still black background. I can see the wallpaper on the lock screen though. and ideas to why it doesnt change?

[ja73d]

I did all this now I notice under settings, show my caller id it is now greyed out and I can't turn it on. Anyone else have this?

[ericidle]

yes Its seems to be that easy

Taken direct from the Dev Teams Blog, here is what they say, bold added by me:

"Update 5: If DFU restores are giving you trouble, another route to pwned 2.0 for 1G owners is to use our first pwnage at 1.1.4. Once you are pwned there, you can do a normal recovery-mode restore to your custom 2.0 ipsw. BTW the iPhone does *not* need to be pre-pwned to be able to DFU-restore into a pwned ipsw — it needs to be pre-pwned only for normal recovery-mode restores of custom ipsw’s."

[cosmoLV]

Originally Posted by ja73d

I did all this now I notice under settings, show my caller id it is now greyed out and I can't turn it on. Anyone else have this?

This is depending on your carrier and your carrier services, if you not have ordered Hide caller ID, then this option will be disabled