Fixed Error 1011 - ModMyiFone.com - iPhone

meloyo · #1 (**permalink**) 06-05-2008, 07:48 PM

omg i cant belive it i DID IT

well i used winpwn and i made a custom firmware with this random junk on it a bam it worked!!!!

but now when it is activated it has like no wifi, or phone,, like the baseband is damaged!
anyone know how to fix that???

but anyone that has this error contact me and i will tell them how to fix it!!!

Poseidon79 · #2 (**permalink**) 06-05-2008, 07:55 PM

Best bet now would be to restore to stock apple firmware and run the wifi fix when you rejailbreak with iLiberty

meloyo · #3 (**permalink**) 06-05-2008, 07:58 PM

i try that but it is like stuck at
Unpacking Custom Payload...

Poseidon79 · #4 (**permalink**) 06-05-2008, 08:03 PM

GRRRR! damn

meloyo · #5 (**permalink**) 06-06-2008, 02:03 PM

do u know how to fix that
i guess i dont get anymore support...???

come on!
bump bumpity bump bump bump!

jtesnani · #6 (**permalink**) 06-06-2008, 03:24 PM

poseidon suggested restoring with the stock iphone firmware, not the custom one. sounds like you're restoring with the custom one

meloyo · #7 (**permalink**) 06-06-2008, 04:21 PM

yup i am
but if i restore with sock i get error 1011
when i restore with custom i get nothing it works
but tbaseband still messed
i cant tell what version it is
and wifi
phone
and sound dont work
ziphone or iliberty wont work to fix those

hiflyer · #8 (**permalink**) 06-06-2008, 06:02 PM

Try This:

1. Letâ€™s get into DFU Mode. Connect to your computer, hold the power and home buttons down (the iphone will power off after about 10 seconds, but keep holding both buttons down)
2. As soon as the iPhone powers off, (black screen) release the power button (but keep holding the home button down). (If you see the apple logo or connect to itunes logo you are not in DFU mode so try it again)
3. After about 20 seconds or so, Itunes should see your iphone. It is now safe to release the home button, and your iPhone is in DFU mode.
4. Now iTunes should ask you to restore its firmware.

Restore to 1.1.4 and jailbreak with iliberty+

Have you tried DFU restore and get the 1011 error, then restore again with normal restore (cable and itunes logo). I saw one post that the person said it worked for him.

meloyo · #9 (**permalink**) 06-06-2008, 06:39 PM

ive tried that but its not the error im worried bout
its the fact that i need to either
replace the baseband
flash it
or fix it and i dont know how
the only option would be to virginize but i have no wifi
so i am trying to put
"The Virginizer" package through winpwn but no icon for it shows up so i dont know what to do

cause i need to virginize it

bootneuter gets stuck at the screen and says loading
so that doesnt work

humphnor · #10 (**permalink**) Yesterday, 11:07 AM

I am in the sam boat. I can restore a custom software image but cannot restor the factory Apple firmware without error 1101.

The issue occured when I ran ZiPhone. The software did nothing for 20 minutes and then cause a boot starting error error intiating device .. BSd root: md0, major 2, minor 0 repeatedly (sorry don't have the message as I don't want to risk it never booting again)

I am running winpwn and can get a custom image to install. However my bluetooth has no address. My wifi has no address and is grayed out. My IEMI has been wiped. My ICCI is no longer there.

My SIM car is also now locked. When I connect the phone to iTunes it says there is no sim card installed.

Am I stuck up a creek without a paddle?