iLibertyX - Premier iPhone/iTouch Jailbreaking, Unlocking, Activation for OS X

[thedirtyone]

Originally Posted by marcoiac

From this it looks like you may want to use iLibertyX only on FW 1.1.4

However, the iphoneproject website says "Whether it be using older jailbreaking methods for phones pre-1.1.4, or setting your new phones free for the first time, you can do it all simply by checking a box." This suggests one can use iLibertyX on all sorts of iPhones.

The information is a bit in conflict here. What's the answer?

I think what they're getting across is that it's not JUST for OTB iPhones. I can't say that it will work with FW 1.1.3 or older, but the safe bet would be to re-virginize (if needed) and restore to 1.1.4.

Originally Posted by marcoiac

I have a JB 1.1.3 with Nate's softupgrade from 1.1.1. I'd rather use iLibertyX without restoring to 1.1.4. Can I? Which FW do I end up with if I don't restore, 1.1.3 or 1.1.4?

Also, what's the point of the reflash EDGE/WiFi/Bluetooth payload? After Nate's JB, my WiFi is fine, but my EDGE is a bit buggy (I think it works, I see EDGE's IP address but the icon does not show and I can't use YouTube on EDGE, only on WiFi.) Would it be helpful in my case to use this payload (I am an ATT customer, so I only jailbreak)?

Thanks a lot.

I would backup everything and restore to 1.1.4. The E/W/B fix will reflash your baseband if you were having problems with a different method. It wouldn't hurt to try.

[Poseidon79]

Originally Posted by rockjohn

can u undo the jaill break using the program if so how ??

To undo a jailbreak all you have to do is connect to iTunes and hit the RESTORE button and it will bring your phone back to factory state.

[thedirtyone]

Originally Posted by Remik_k

Don't work by me. I have connected my iphone and started XLiberty and 15 times quit.

Have you tried rebooting your computer? Have you tried plugging in your iPhone into a different USB port? Is your iPhone in DFU? Give some more information.

Originally Posted by rockjohn

can u undo the jaill break using the program if so how ??

Restore your iPhone.

[abukadi]

Quote:
Originally Posted by abukadi View Post
iLiberty quits every time I start it . my iPhone is just restored to 1.1.2 16GB
what's the deal here? anybody has a success story with this software?
have you tried restarting your computer?

I figured it out, it quit after taking the iphone out of the recovery mode and u need to start iTunes and the restart iLibertyX again it should works fine now.

I have a problem with JB 1.1.2 it seems not working properly it stuck my iphone on the recovery mode and if I stop the process the test starts to appear on my iPhone and stuck there forever so I need to restore the FW again.

I tried it with 1.1.4 and it worked fine but i want 1.1.2 . any work around??
if not then this software did not add anything to iPlus2.0b basically.

anyway I will restore my phone now and try using other software to JB and unlock.

[thedirtyone]

Originally Posted by abukadi

I figured it out, it quit after taking the iphone out of the recovery mode and u need to start iTunes and the restart iLibertyX again it should works fine now.

I have a problem with JB 1.1.2 it seems not working properly it stuck my iphone on the recovery mode and if I stop the process the test starts to appear on my iPhone and stuck there forever so I need to restore the FW again.

I tried it with 1.1.4 and it worked fine but i want 1.1.2 . any work around??
if not then this software did not add anything to iPlus2.0b basically.

anyway I will restore my phone now and try using other software to JB and unlock.

Put your 1.1.2 into DFU and restore to 1.1.4. Then use iLibertyX.

[marcoiac]

Originally Posted by thedirtyone

I would backup everything and restore to 1.1.4. The E/W/B fix will reflash your baseband if you were having problems with a different method. It wouldn't hurt to try.

Thanks.
But if I restore to 1.1.4 I should also get the baseband that goes with it (which is 4.04something, I think), so that should fix my previous baseband issues anyway, shouldn't it?

[abukadi]

Put your 1.1.2 into DFU and restore to 1.1.4. Then use iLibertyX.

My phone is 1.1.3 OTB, the thing is I don't want to restore to 1.1.4 I know it works. I need my phone to be on 1.1.2 cuz I want to use this FW not 1.1.4. any help with that?

[steve_k]

will this work on a 4GB iphone? also does anyone know if the edge/wifi/bluetooth flash will fix a grayed out wifi? Just kinda getting a idea before i try it on my grayed out iphone.

[Poseidon79]

It works on ANY version of the iphone, 4,8,16GB. If you're wi-fi is messed up give this a shot... what's the worst that can happen? Stilled grey out.. haha. Good luck.

[exg5]

iLibertyX will even upgrade the bootloader on 3.9 b/l phones if you so desire (note the bootloader upgrade does not work on ziphone unlocked phones)

If we've already jailbroken and unlocked using ZiPhone, can we restore using iTunes and the have the ability to upgrade our bootloaders?

[Poseidon79]

Any phone that has been unlocked with ziphone and has downgraded the bootloader is PERMANENT!! unless you disassemble the phone and do a hardware flash. BUT... why would you want to upgrade your bootloader... this would limit you to the 4.02 baseband and your "locate me" feature would cease to be functional.

I seriously do not understand why people have this obsession with getting back to the 4.6BL... there NO ADVANTAGE!! Downgrading the BL whether it be to 3.9 or 3.9FB is the ONLY way to unlock basebands 4.03 & 4.04 at the moment.

[exg5]

Originally Posted by Poseidon79

Any phone that has been unlocked with ziphone and has downgraded the bootloader is PERMANENT!! unless you disassemble the phone and do a hardware flash. BUT... why would you want to upgrade your bootloader... this would limit you to the 4.02 baseband and your "locate me" feature would cease to be functional.

I seriously do not understand why people have this obsession with getting back to the 4.6BL... there NO ADVANTAGE!! Downgrading the BL whether it be to 3.9 or 3.9FB is the ONLY way to unlock basebands 4.03 & 4.04 at the moment.

Yes, at the moment... but what happens when they have a new bootloader and they do manage to find a way to crack it... then I'm screwed and won't get that added functionality.

[Poseidon79]

The functionality comes from the BASEBAND (modem firmware)! not the bootloader.

[exg5]

oh ya right... then what does the bootloader do again? (sorry I don't fully understand how these components work)

[Poseidon79]

Sorry if I was a bit harsh... I'm battling major allergies and it's putting me in a crappy mood. As far as what the bootloader ACTUALLY does... I will leave it up to someone more educated about it to give you an expert explanation :-)